[SKXMOD] CasiOak Gen.4 Remake GMA-S2100 Series Modding Kits | Bracelet Version

This is remake version of our Gen.4 CasiOak modding kit.

Fit and finish being the same as the ongoing Gen.5, only minus the crown.

          SPECS:

• Individual Link Length: 0.65cm (3$ per piece)
• (Extra links purchase from this listing)
• Case Diameter: 41.4mm (Without Crown)
• Lug to Lug: 56.1mm (With Endlinks)
• Lug to Lug: 51mm (Without Endlinks)
• Thickness: 11.7mm (Before Assembly)
• Lug Width: 27mm
• Brushed and Polished Surface Finishing

          COMPATIBILITY

• Casio GMA-S2100 Series

Our case does not always fit all model from above mentioned series.

Because on certain limited/special/collaboration model, Casio might do small modification.

Therefore, the general dimension of the inner carbon core is changed. Cannot fit into our case anymore.

GAE-2100 series is sure won't fit. Please buy with cautions if you have such model.

Therefore, CHECK MODEL FIRST BEFORE PURCHASE!!!

Again, this is only for GMA-S2100 models.

FKM stands for Fluoroelastomer, which is a class of man-made rubber of great density but soft in touch. Our DAI-EL FKM rubber bands and many accompany accessory are specifically made by Daikin.

Able to offer exceptional resistance to wide range of industrial chemicals. Such as acids, oils, and fuels. With their strong carbon-fluorine bonds and low gas permeability, these materials are able to withstand harsh environments and maintain their integrity in low to high temperature conditions. Range from -45 °C to +204 °C.

Most importantly, resistance to oil and sweat in consumer grade product such as this. Soft, flexible, non-reactive materials which will not degrade in long term usage.

Attentions:

This product only provides modding kit for GMA-S2100 Series.

Hence, please check for the make and model thoroughly before purchasing.

The timepiece itself presented in the pictures is not included as well.

Please do not use excessive force onto bracelet screws.

If you encounter certain resistance during process of loosening.

Then please do not go further and strip the slot on top.

Instead, slightly warm up the links to dissolve adhesive inside.

Use push pin to nudge the other end of screws a bit by bit.

Only then to continue the screw loosen maneuver.

Also, this listing only contains case and bracelet as main item.

There is no extra layer of glass or lens installed within the case bezel.

For extra set(s) of accessory, please purchase them through the menu. 

Unless stated otherwise, bracelet color follows mid-case's color.

(There might be slight color difference among different accessory and case under same colorway.)

(Due to many variating factor: manufacturing method, material, design and more.)

(Also factor in that we make our own spray painting. Please take into consideration.)

(The term of "Gold" and "Silver" merely represents the colorway.)

(Not meaning coated or made out of true precious metal.)

(Necessary tools and parts are included in the packaging)

This product is not manufactured by Apple, Seiko, Casio or related brands.

It is made by SKXMOD.

A third-party product to accessorize aforementioned brands and more.