[SKXMOD] #10 Ana-Digi Tuna Completed Build

Please note that due to their originality, except for quality issues,

any customized merchandise by SKXMOD are not returnable or refundable. 

Hope you can understand.

CLICK TO SEE PURCHASHING REMINDERS

CLICK TO SEE DIGITAL MANUAL

          DEMONSTRATION:

          SPECS:

• FKM Rubber Source Supplier: Daikin Chemicals Japan
• Case Material: 316L Stainless Steel or Grade 2 Titanium 
• (Buttons Pre-installed on cases)
  
• Shroud Material: 316L Stainless Steel or Grade 2 Titanium
  
• Shroud Screws Material: 316L Stainless Steel or Grade 2 Titanium
• Bezel Material: 316L Stainless Steel or Grade 2 Titanium
• Bezel Insert Material: Ceramic
• Buckle Material: 316L Stainless Steel or Grade 5 Titanium
• Retainer Material: 316L Stainless Steel or Grade 5 Titanium
• Coating: Metal Hardware Fully IP Coated, Rated over 980HV on Vickers Hardness Test
• Glass: Sapphire (AR coated on underside)
• Wrist Circumference (Rubber): 16cm to 22cm
• Case Diameter: 45.6mm (Without Shroud)
• Case Diameter: 51.8mm (With Shroud)
• Lug to Lug: 44.4mm (Without Shroud)
• Top to Bottom 53.2mm (With Shroud)
• Thickness: 16.4mm
• Lug Width: 22mm
• Water Resistant: 50ATM Tested
  (Optimal 100 ATM)

       Stainless Steel Version:

• Weight: 150g
• (Case Assembly without Module Installed)
• Weight: 157g
• (Case Assembly with Module Installed)
• Weight: 217g
• (Case & Module and Rubber Band, Retainer, Buckle)
• Weight: 61g
• (Rubber Band, Retainer, Buckle)

       Titanium Version:

• Weight: 95g
• (Case Assembly without Module Installed)
• Weight: 102g
• (Case Assembly with Module Installed)
• Weight: 153g
• (Case & Module and Rubber Band, Retainer, Buckle)
• Weight: 51g
• (Rubber Band, Retainer, Buckle)

FKM stands for Fluoroelastomer, which is a class of man-made rubber of great density but soft in touch. Our DAI-EL FKM rubber bands and many accompany accessory are specifically made by Daikin.

Able to offer exceptional resistance to wide range of industrial chemicals. Such as acids, oils, and fuels. With their strong carbon-fluorine bonds and low gas permeability, these materials are able to withstand harsh environments and maintain their integrity in low to high temperature conditions. Range from -45 °C to +204 °C.

Most importantly, resistance to oil and sweat in consumer grade product such as this. Soft, flexible, non-reactive materials which will not degrade in long term usage.

Attentions:

This product is selling a completed build of "Ana-Digi Tuna".

And the assembly of this watch is carried out by our team, aka, SKXMOD.

The idea is to wear this timepiece immediately upon unboxing.

Without any installation and least possible labor to adjust.

Therefore you will only get the build in its individual form as video illustrated.

Changes apply for different variants within the listing chose through options.

But bear in mind that this modding combination is set and cannot be changed.

Please do consider thoroughly before purchasing, because of labor and time.

We will not accept any further request of changes after the assembly begin.

If you want deeper customization, the please go to this site skxmod.design 

Then consult with our customer service for 1 on 1 custom made build.

Due to the originality of it, the order processing and assembly time might take longer than expected.

Depends on the difficulty, it will range from 1 to 2 working weeks till finishing.

Shipping label will be created first. Meanwhile, please be patient with the process. 

Lastly, except for quality issues, customized orders are not allowed to refund or return.

The harden surface only prevents daily minor bumps and scratches from forming.

Does not mean it can withstand impact, puncture, slashes or substantial force in similar form.

The beeping volume will be weaken severely for the full metal enclosure.

Please purchase with discretion if you have concern of regards.

(There might be slight color difference among different accessory and case under same colorway.)

(Due to many variating factor: manufacturing method, material, design and more.)

(Also factor in that we make our own spray painting. Please take into consideration.)

(The term of "Gold" and "Silver" merely represents the colorway.)

(Not meaning coated or made out of true precious metal.)

(Necessary tools and parts are included in the packaging)

This product is not manufactured by Apple, Seiko, Casio or related brands.

It is made by SKXMOD.

A third-party product to accessorize aforementioned brands and more.