[SKXMOD] #7 A168 & F-105W Completed Build

Please note that due to their originality, except for quality issues,

any customized merchandise by SKXMOD are not returnable or refundable. 

Hope you can understand.

          DEMONSTRATION:

          SPECS:

• Case Material: 316L Stainless Steel (Buttons Pre-installed on Cases)
• Bronze Alternative:
• Case and Button Material: CNC milled CuSn8 Bronze (Buttons pre-installed)
• Caseback Material: 316L Stainless Steel (Optional)
• Bracelet: 316L Stainless Steel (Milled Clasp)
• Coating: IP Coated, Rated over 980HV on Vickers Hardness Test (Bracelet: Also Coated)
• Coating Colors: Only Silver and Black parts are super-hard coated. Gold and Rose Gold are not.
• Glass: Sapphire (AR coated below)
• Weight: 36.6g (Case with Module Installed)
• Weight: 96.9g (Full Links with Module Installed)
• Weight: 30.3g (Bracelet with Full Links)
• Weight: 55.7g (Rubber Band with Module Installed)
• Weight: 19.1g (Rubber Band with Buckle)
• Weight: 4.5g (SKXMOD SS Caseback)
• Case Diameter: 33.8mm (Without Buttons)
• Thickness: 8.1mm (Before Assembly)
• Thickness: 10.2mm (SKXMOD SS Caseback)
• Thickness: 10.15mm (Original Caseback)
• Wrist Circumference(Rubber): 14cm - 21cm
• Wrist Circumference(Bracelet): 16cm - 21cm
• Individual Link Length: 0.66cm (3$ per piece)
• (Extra links purchase from this listing)
• Lug to Lug: 39mm
• Lug Width: 18mm

Attentions:

This product is selling a completed build. Not a modding kit.

And the assembly of this watch is carried out by our team, aka, SKXMOD.

The idea is to wear this timepiece immediately upon unboxing.

Without any installation and least possible labor to adjust.

Therefore you will only get the build in its individual form as video illustrated.

Nothing more and nothing less, please do not mistaken anything else would be given.

But bear in mind that this modding combination is set and cannot be changed.

Please do consider thoroughly before purchasing, because of labor and time.

We will not accept any further request of changes after the assembly begin.

Due to the originality of it, the order processing and assembly time might take longer than expected.

Depends on the difficulty, it will range from 1 to 2 working weeks till finishing.

Shipping label will be created first. Meanwhile, please be patient with the process. 

Lastly, except for quality issues, customized orders are not allowed to refund or return.

Please do not use excessive force onto bracelet screws.

If you encounter certain resistance during process of loosening.

Then please do not go further and strip the slot on top.

Instead, slightly warm up the links to dissolve adhesive inside.

Use push pin to nudge the other end of screws a bit by bit.

Only then to continue the screw loosen maneuver.

For bronze alternative:

Please avoid using chemical solution to accelerate patina forming and removing.

For it might deform or corrode the gaskets within buttons under accidental or improper procedures.

Or further more, ruining the bronze material permanently.

And in such sitaution, we are not responsible for the product's after-sales service.

For possible patina formed during transportation.

You may try using coke or ketchup to let the case fully submerge.

Till the surface stain or marks are removed. Or to a degree you satisfied.

But don't forget sealing if off with installing caseback first.

Afterwards, wash off excess material under running water.

There is also a method using baking powder and lemon juice to create a paste.

Then use a toothbrush to brush off any patina you don't want.

To have a fresh start to cultivate new patina at any given moment.

Mind that this is not a defect, patina is a natural reaction for this particular case material. 

And if you are worried or does not like the effect, please do not purchase.

Because it WILL have patina forming one way or another at certain point.

(There might be slight color difference among different accessory and case under same colorway.)

(Due to many variating factor: manufacturing method, material, design and more.)

(Also factor in that we make our own spray painting. Please take into consideration.)

(The term of "Gold" and "Silver" merely represents the colorway.)

(Not meaning coated or made out of true precious metal.)

(Necessary tools and parts are included in the packaging)

This product is not manufactured by Apple, Seiko, Casio or related brands.

It is made by SKXMOD.

A third-party product to accessorize aforementioned brands and more.